Close
Close

New enquiry

Construction Equipment
5100021400

Wacker Neuson DPU6555 Reversible Plate

Wacker Neuson DPU6555 Hec Reversible Plate

Unbeatable on any subsurface.

Thanks to its enormous compaction force combined with a quick forward and reverse travel, the DPU6555 offers an extremely high level of productivity.

It is an all-rounder for all job sites where extreme demands are placed on the performance efficiency of a unit.

Diesel Powered

 

POA

Thanks to its enormous compaction force combined with a quick forward and reverse travel, the DPU6555 offers an extremely high level of productivity. It is an all-rounder for all job sites where extreme demands are placed on the performance efficiency of a unit.

In addition, it offers excellent characteristics in terms of service life and operating comfort. Optimal application areas are the compaction of frost coverings and base layers in street, path and parking lot construction as well as backfilling buildings.

Thanks to a frequency of 69 Hz, the DPU6555 is universally applicable and even reliably compacts heavy interlocking paving stones. The new center pole reduces hand-arm vibration (HAV) to a minimum and therefore offers a high level of operating comfort at full compaction performance. All maintenance points are quickly and easily accessible. The model version DPU6555Hec is equipped with Compatec, the compaction control by Wacker Neuson.

Operating weight: 497  kg
Centrifugal force: 65kN
Base plate size (W x L): 550 x 900 mm
Base plate thickness: 12mm
Height (ground clearance): 861mm
Operating width (with extension plate): 710mm
Frequency: 69Hz
Hand-arm vibrations: < 2.5 m/s²
Advance travel max. (dependent on soil and environmental influences): 28 m/min
Surface capacity max. (dependent on soil and environmental influences): 1,200 m²/h
Gradeability: 46.6%
Transport height: 1,521mm
Transport length: 1,060mm
Transport width: 780mm
Shipping Weight: 502kg

Engine /Motor type: Air-cooled single cylinder four-cycle diesel engine
Engine / Motor manufacturer: Hatz
Engine / Motor: 1D81S
Displacement: 667cm³
Engine performance max. (DIN ISO 3046 IFN): 10.1 kW
At 3,600 rpm
Engine performance (rated power) (DIN ISO 3046 IFN): 9.6kW
At 2,800 rpm
Operating performance (DIN ISO 3046 IFN): 6.8kW
At 3,010 rpm
Fuel consumption: 1.9 l/h
Tank capacity (fuel): 6. l
Power transmission: From the drive motor via centrifugal clutch and V-belt directly to the exciter.
Fuel Type: Diesel
CO2 (NRSC):  *974 g/kWh

*Determined value of the CO2 emission during engine certification without consideration of the application on the machine.

No restriction for the time of operation and no documentation effort.

A dead man function prevents the operator from being trapped between the equipment and an object when working in reverse.

Extensive comfort functions: such as low oil shutdown, self-tightening V-belt, maintenance-free alternator, pull-out external jump-start connection that is accessible from outside.

A narrower frame is optionally available. The compact dimensions facilitate application in tight spaces.

Compatec: Easy-to-read display of the relative compaction progress. Warning for overload and over-compaction. Brightness adjustment of the lights to the ambient light. Extremely sturdy and reliable.