Close
Close

New enquiry

Construction Equipment
5200019250

Wacker Neuson RTLx-SC3 Trench Roller

Wacker Neuson RTxSC3 Trench Roller

RTxSC3 Trench Roller.

The RT trench roller with the SC3 infrared-remote control offers proven compaction results with safer operation. The smart control uses an infrared signal with line-of-sight control.

Remote Controlled

 

POA

The RT trench roller with the SC3 infrared-remote control offers proven compaction results with safer operation. The smart control uses an infrared signal with line-of-sight control.

The machine stops moving and vibrating should the line-of-sight be lost or if the operator comes within three feet (one meter) of the roller’s receiving eyes with the control box. The articulated trench roller offers below the axle exciter in each drum to allow for the efficient transfer of compaction energy to the soil for superior compaction results. Available with the choice of Kohler or Kubota engine.

The RTx models are available with Compatec, the compaction control system that indicates the relative compaction level of the soil

Operating weight: 1,495  kg
Centrifugal force min: 34.2kN
Centrifugal force max: 68.4kN
Base plate size (W x L x H): 1853 x 820 x 1270mm
Drum diameter: 520mm
Width Drum: 560 / 820*
Operating width: 970mm
Frequency: 41.7Hz
Linear force static (per drum): 10.2 N/mm
Linear force dynamic (per drum):  45
Travel speed forward: 2.5km/h
Travel speed reverse: 2.5km/h
Turning radius inner: 1,600mm
Surface capacity max. (depending on soil consistency): 990m²/h

Gradeability max. (without vibration): 50%
Gradeability max. (with vibration): 45%

Engine /Motor type: Water-cooled 3-cylinder diesel engine with electric starter
Engine / Motor manufacturer: Kohler
Engine / Motor: KDW1003
Displacement: 1,028cm³
Operating performance max. (DIN ISO 3046 IFN): 14.8 kW
RPM / Speed Operating: 3,000 rpm
Fuel type Low Sulfer / Ultra Low Sulfer: Diesel
Fuel consumption: 4.5 l/h
Tank capacity (fuel): 24l

*RTx model drums can be configured for 32in (820mm) or 22in (560mm) width.

Patented three receiving eye design eliminates signal loss from trench shoring while retaining the line-of-sight control of the roller. With 16 channel transmission, multiple rollers can be operated on the same job site without interference from one another.

RTx model offers flexible drums that allows for convenient conversion from 32 in/82 cm to 22in/56 cm. The easy to remove extensions have a central mounting system that protects the bolts from exposure to damage during operation.

The articulated joint increases maneuverability and the low center of gravity improves stability. High and low compaction force provides flexibility depending on the job.

The lower end is completely maintenance-free due to the self-lubricating design of the drive and the exciter.

The engine control module with diagnostic LEDs monitors machine functions such as oil pressure, radiator level, engine temperature, glow plug, battery and air filter capacity for easy operation and troubleshooting.