$5,623.50 NZD (inc GST)
Tow and Mow is the tough, reliable way to mow your paddock or section. Simply attach your mower to any ATV and you are ready to go. Easy to use and suitable for a range of properties; there’s a Tow and Mow for any need.
The Tow and Mow series of tow behind mowers With 5 models in the Tow and Mow Range there is one to suit your farm or lifestyle property.
Tow and Mow Twin Wheels are on side of the machine offering good stability on all mowing/topping terrains. An affordable topping solution for small block farms or lifestyle owners.
TOW AND MOW Twin 1270 The Twin Series features the wheels positioned on the side of the Tow and Mow, where the Hort Series has them positioned behind.
The Tow and Mow Twin series is more suitable for undulating, rough grounds and all-terrain topping. This is because the wheels are in line with the engines which reduce potential ground scalping when cutting low. Top your paddocks at up to 15 km/hr (9 mph) with the Tow and Mow – this means you can cover up to 1 hectare (2.5 acres) in just 35 minutes with the 1270 model. Easily adjust the cutting height from 30mm (1.25”) up to 180mm (7”) by just winding a handle at the rear of the machine. No locking pins or heavy adjustment required, just wind it up for travelling between jobs and then back into position for mowing.
Weight: 215 kg Dimensions: 138 × 183 × 75 cm Cut Width: 1270mm (50 inches) Engine Model: 2 x Briggs and Stratton – 850 Series Engine Horsepower: 190cc / 5.5hp* x 2 Height Adjustment: 30mm – 180mm (1.25″ – 7″) Size Assembled: 2.2×1.7×0.6m (7’5”x5’8”x2’) Size Crated: 1.38×1.83×0.75m (4’6”x6’x2’6”) Weight Uncrated: 165 kg (365 lbs) Weight Crated: 215kg (475lbs) Jockey Wheel: Optional Electric Key Start: N/A Tow Hitch: 50mm Coupling
TWIN ENGINES This has eliminated the need for belts and pulleys on a single engine setup. Very few parts result in a very simple solution.
GRASS HEIGHT Even if the grass is knee height, the Tow and Mow is designed to handle this but you may need to travel slower. It depends on how dense your pasture is.
OFFSET ENGINES The engines are offset which means they have a cutting overlap of 25mm (1 inch) ensuring there is no belts or timing necessary! Simple!
BUILD QUALITY Construction is 4mm thick, high grade steel which is zinc sprayed and then powdercoated.
