$5,968.50 NZD (inc GST)
or from $4,468.50 today & 5 weekly interest-free payments of $300.00 with
Tow and Mow is the tough, reliable way to mow your paddock or section.
Simply attach your mower to any ATV and you are ready to go.
Easy to use and suitable for a range of properties; there’s a Tow and Mow for any need.
The Tow and Mow series of tow behind mowers
With 5 models in the Tow and Mow Range there is one to suit your farm or lifestyle property.
Tow and Mow Hort:
Wheels behind the body of the machine which allows topping up to fence lines, or fitting between rows or vines with its trailing wheels.
TOW AND MOW HORT 1270
The Hort Series features the wheels positioned behind the body of the Tow and Mow – where the Twin Series has them positioned beside.
The Tow and Mow Hort series is more suitable for those wanting to cut close to fence lines, around trees and down rows as the width of the mower is the full width of the cut. The Hort series feature a jockey wheel as standard which allow for effortless connecting to your ATV or tow vehicle. Top your paddocks at up to 15 km/hr (9 mph) with the Tow and Mow – this means you can cover up to 1 hectare (2.5 acres) in just 35 minutes with the 1270 model. Easily adjust the cutting height from 20mm (1”) up to 200mm (8”) by just winding a handle at the rear of the machine. No locking pins or heavy adjustment required, just wind it up for travelling between jobs and then back into position for mowing. The Hort Series features our patented direct drive system which means the cutting spindle is directly mounted onto the engine crankshaft. This means there is no belts or pulleys which typically are the Achilles heel of this type of mower.
Weight: 235 kg
Dimensions: 135 × 168 × 75 cm
Cut Width: 1270mm (50 inches)
Engine Model: 2 x Briggs and Stratton – 850 Series
Engine Horsepower: 190cc / 5.5hp* x 2
Height Adjustment: 20mm – 200mm (1″ – 8″)
Size Assembled: 2.6×1.3×0.6m (8’7”x4’4”x2’)
Size Crated: 1.35×1.68×0.75m (4’5”x56”’x2’6”)
Weight Uncrated: 180kg (395lbs)
Weight Crated: 235kg (520lbs)
Jockey Wheel: Yes
Electric Key Start: N/A
Tow Hitch: 50mm Coupling
This has eliminated the need for belts and pulleys on a single engine setup. Very few parts result in a very simple solution.
Even if the grass is knee height, the Tow and Mow is designed to handle this but you may need to travel slower. It depends on how dense your pasture is.
The engines are offset which means they have a cutting overlap of 25mm (1 inch) ensuring there is no belts or timing necessary! Simple!
Construction is 4mm thick, high grade steel which is zinc sprayed and then powdercoated.